Ψηφιακός Μετρητής Εδάφους 5 σε 1 Soil Tester ST7051
Μετρήσεις Ph, Υγρασίας, Θερμοκρασίας, Ηλιακής Ακτινοβολίας, Υγρασία Περιβάλλοντος
Το απαραίτητο όργανο για έναν υγιή κήπο
Μετράει με ακρίβεια
• Ph
• Υγρασία
• Θερμοκρασία
• Ηλιακή Ακτινοβολία
• Υγρασία Περιβάλλοντος
Product Parameter:
- Mainly test the ambient light of the soil. Environmental hygrometer. Soil moisture content. Soil temperature value. Soil pH.
- Long enough aluminum alloy probe to adapt to multi-soil environment.
- The operation is simple and the parameters are displayed on the large screen, which is concise and clear.
- At the same time, it has a bottom power display reminder.
- The product is small and exquisite, suitable for the human body, saving time and energy.
- Convenient to carry and improve efficiency.
- Suitable for flower and grass planting, landscaping, vegetable planting, etc.
Specifications:
- Automatic shutdown without any operation for 5 minutes
- PH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline)
- Measurement range: 3-8ph, 1-8moisture
- Resolution: ±0.2
- Accuracy: ±0.2pH
- Working temperature: 5~40°C
- Item weight: 115g
- Battery:9V battery (Not included)
- Product size: 77*77*33mm
Instructions:
Please install the battery before use and remove the probe protective cover
Illumination measurement
- Press the [ON] button to turn on the instrument.
- Aim at the highest point light source light sensor.
- The intensity of the light will be displayed on the LCD display.
- Note: Please do not block the light or create shadows on the light sensor.
PH measurement
- Push the [PH/C] button on the back to the PH position.
- The probe is inserted vertically into the soil and the test needs to be carried out as soon as possible.
- Press the [ON] button to start measurement.
Note:
- Insert the probe vertically, at the edge of the plant stem in the middle.
- Push gently into the soil to avoid damage to the probe.
- If the measured soil is too dry or fertile to measure the accurate PH value, the user can sprinkle some water and measure again after half an hour.
Temperature measurement
- While measuring the humidity, the soil temperature value will be displayed on the LCD display at the same time.
- Press the (C/F OFF) button to set the humidity display to "C" or "F".
- Note: If the probe is not inserted into the soil, then the display is the accurate ambient temperature of the outside space.
Moisture measurement
- Push the (PH/C) button on the back to the "C" position.
- Insert it into the soil as vertically as possible.
- Press the ON key to start the measurement.
Environmental humidity measurement
- After powering on, push the (PH/C) button on the back to the "C" position, and the environmental humidity parameters will be displayed on the LCD.
Measure the light intensity of the current environment:
LOW-.LOW.LOW+.NOR-.NOR.NOR+.HGH-.HGH.HGH+
Measure the moisture content of the soil:
DRY+.DRY.NOR.WET.WET+
Measure the temperature of the soil:
-9~+50°C (16~122°F) accuracy: 1°C/1°F
Measure the pH of the soil:
PH value range: 3.5-9.0
Measure the humidityof the soil environment and the percentage of temperature
Products Include:
- 1 x 5 in 1 PH Meter Soil Moisture Monitor Temperature Sunlight Tester(Without Battery)
- 1x Manual (in English)
- Packing boxes
Ο μετρητής τροφοδοτείται από μία μπαταρία 9V που δεν συμπεριλαμβάνεται στη συσκευασία.